Tiles and joints: how to cut tiles and make neat corners?

Professional tile cutting and the formation of neat external and internal corners require specialized tools and strict adherence to safety regulations. When working with tiles, there is an iron rule: first, you need to completely deal with safety and engineering networks, such as electrical wiring, water pipes, and ventilation, and only then proceed to finishing and decor to minimize hidden problems.

For a straight cut, a mechanical tile cutter is used, which scores the glaze and then breaks the tile along the line with a light press. For complex shaped cutouts for pipes, sockets, or switches, manual "ballerina" nippers, water-cooled electric tile cutters, or an angle grinder with a diamond blade are used.

The formation of beautiful external corners can be done in three main ways depending on your experience and design project:

When working with cutting tools, always wear safety glasses, a respirator, and gloves, as ceramic dust and small shards are hazardous to health. Do not forget to grind the cut edges with a diamond block or 120-220 grit sandpaper to remove sharp burrs and make the joints aesthetic.